GYS 065499 MIG Multiweld FV220M-C Portable Package 110/240V [24891]
GYS 065499 MIG Multiweld FV220M-C Portable Package 110/240V [24891]
Roll over image to zoom in
GYS 065499 MIG Multiweld FV220M-C Portable Package 110/240V [24891]
GYS 065499 MIG Multiweld FV220M-C Portable Package 110/240V [24891]

GYS 065499 MIG Multiweld FV220M-C Portable Package 110/240V

Save £153.90
Free UK Delivery*
GYSOur Code: 24891 GYS's Code: 065499 Shelf: LEE02 Group: 047A
Price (each):
£872.10 £1,026

Incl. Tax: £1,046.52

Or Call Us
01372 230456

Features

  • Compact single-phase welding machine
  • Combines MIG/MAG, cored wire, and MMA welding processes
  • Operates on a supply voltage between 85 and 265 V thanks to its FV (Flexible Voltage) power supply
  • Equipped with an accurate 4-roller wire feeder system
  • Reinforced structure with 2 handles for lifting and slinging
  • Ideal for welding in the workshop and for quick troubleshooting on site
  • MIG/MAG welding: steel wire: Ø 0.6 to 1.0 mm, stainless steel wire: Ø 0.8 to 1.0 mm, aluminium wire: Ø 0.8 and 1.0 mm, cored wire (reverse polarity): Ø 0.9 to 1.2 mm
  • MMA welding: basic and rutile electrodes (up to Ø 5 mm)
  • Choice of the trigger mode: 2T or 4T
  • Welding guide: tables assist the user to adjust and fine tune the voltage and the diameter of the filler wire according to the thickness of material being welded
  • Display readable even in bright light
  • Simple user interface with ergonomic controls allowing gloved use
  • Compatible with reels: Ø 200 / 300 mm
  • Wire feeder with 4 rollers for an efficient wire feeding
  • EURO torch connector for quick assembly/disassembly
  • Pre-installed socket (36 V - 4.2 A) for gas heater in pure CO2 welding (heater not included)
  • Compatible with US (type A) and EURO electrical sockets (type C/E/F)
  • IP 23 classification for outside use
  • Accepts very long extension cords (100 m)
  • 2 steel handles for easy manipulation
  • Protected against overvoltage up to 400 V (PROTEC 400)

Specifications

Data Sheet https://anglera.s3.us-west-1.amazonaws.com/temp-images/065499_509995.pdf
Power Supply Voltage 110 V +/- 15% or 230 V +/- 15%
Mains Frequency 50/60 Hz
Number of Phases 1
Fuse 32 A (110V) or 16 A (230V)
Maximum Effective Supply Current 21.9 A (110V) or 14.5 A (230V)
Maximum Supply Current 40 A (110V) or 32.5 A (230V)
Mains Cable Section 3 x 2.5 mm²
Maximum Active Power Consumed 7664 W
Idle Consumption 25.75 W
Efficiency at I2max 79.3%
Power Factor at I2max 0.99
EMC Class A
No Load Voltage 67 V
Welding Current Type DC
Welding Modes MIG-MAG/MMA
Minimum Welding Current 30 A
Rate Current Output 30-220 A
Conventional Voltage Output 15.5-25 V or 21.2-28 V
Duty Cycle at 40°C (10 min) 20% at 220 A, 60% at 160 A, 100% at 120 A
Acceptable Wire Diameters (Steel) 0.6 to 1.0 mm
Acceptable Wire Diameters (Stainless Steel) 0.8 to 1.0 mm
Acceptable Wire Diameters (Aluminium) 0.8 and 1.0 mm
Acceptable Wire Diameters (Cored Wire) 0.9 to 1.2 mm
Torch Connector EURO connector
Drive Roller Type A
Motor Speed 2 to 15 m/min
Motor Power 50 W
Maximum Spool Diameter Ø 300 mm
Maximum Weight of Spool 18 kg
Maximum Gas Pressure 0.5 MPa (5 bar)
Operating Temperature -10°C to +40°C
Storage Temperature -20°C to +55°C
Protection Level IP23
Minimum Coil Insulation Class B
Dimensions 58 x 52 x 34 cm
EAN Code 3154020065499
Weight 24 kg
Length 58 cm
Width 52 cm
Height 34 cm
Welding Processes MIG/MAG, MMA, Cored Wire
Supply Voltage 85 to 265 V (Flexible Voltage)
Steel Wire Diameter (MIG/MAG) Ø 0.6 to 1.0 mm
Stainless Steel Wire Diameter (MIG/MAG) Ø 0.8 to 1.0 mm
Aluminum Wire Diameter (MIG/MAG) Ø 0.8 and 1.0 mm
Cored Wire Diameter Ø 0.9 to 1.2 mm (reverse polarity)
Electrode Diameter (MMA) Up to Ø 5 mm (basic and rutile electrodes)
Trigger Modes 2T, 4T
Reel Compatibility Ø 200 / 300 mm
Wire Feeder 4 rollers
Pre-heating Socket 36 V - 4.2 A (for gas heater in pure CO2 welding)
Electrical Socket Compatibility US (type A) and EURO (type C/E/F)
Protection IP 23
Extension Cord Length Accepts very long extension cords (100 m)
Overvoltage Protection Up to 400 V (PROTEC 400)

Summary

MIG/MAG 220 A SEMI-AUTOMATIC INVERTER WELDING UNIT The MULTIWELD FV 220M-C is a compact single-phase power source combining MIG/MAG, flux-cored wire and MMA welding processes. It operates at a supply voltage of between 85 and 265 V thanks to its FV (Flexible Voltage) power supply. Equipped with a precise 4-roller pay-off system and a reinforced structure with 2 handles for lifting and slinging, it is ideal for welding in the workshop and rapid repairs on site. • MIG/MAG welding : - steel wire: Ø 0.6 to 1.0 mm - stainless steel wire: Ø 0.8 to 1.0 mm - aluminium wire: Ø 0.8 and 1.0 mm - cored wire (polarity inversion) : Ø 0.9 to 1.2 mm • MMA welding: basic and rutile electrodes (up to Ø 5 mm) • 4-roller reel for Ø 200 mm and 300 mm reels • Interface with digital displays for simple, accurate settings • Pre-installed socket (36 V - 4.2 A) for gas heater for welding with pure CO2 • Single-phase power supply from 85 to 265 V (FV: Flexible Voltage) - 32 or 16 A • Protected against overvoltage up to 400 V (PROTEC 400) → Supplied with: - MIG25 torch, European connection (230 A - 3 m) - Earth clamp (2.5 m / 25 mm²) - Electrode holder (2 m / 25 mm²)

Documentation

Owner's Manual
Fact Sheet
Brochure

Supplied with: 

Gas hose with quick release 

Work return lead and clamp 2.5M 

MMA Welding cable 2M 

0.8/1.0mm Feed rollers 

MB25 3M MIG torch 

Dont forget to order : 

Argon/Co2 gas regulator 1248 

- 3 Year warranty

Free UK Delivery

This product is eligible for free shipping within the UK, excluding Northern Ireland and the Highlands where a delivery cost may apply. Free delivery will be applied automatically at checkout for your whole order.

For more information, please see our delivery terms and conditions.

Payment & Security

Visa PayPal Mastercard Maestro Apple Pay

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also be interested in

Recently viewed